5.1 Connect the headset to a computer using the Jabra Link 400

When purchased as a bundle, the headset and the Jabra Link 400 come pre-paired. Plug the Jabra Link 400 into your computer and turn on the headset. It may take up to 15 seconds for the headset to be detected by the computer. You may need to set the headset as the output and input device in the sound settings on your computer.

5.2 Manually pair a headset with a Jabra Link 400 To manually pair a headset with a Jabra Link 400:  

1. Ensure the headset is turned off. To turn off the headset press and hold the Call button for 5 seconds.

2. Press and hold the Call button on the headset for 4 seconds until the LED flashes blue and you hear a tone. The headset is now ready to pair.

3. Press and hold the button on the Jabra Link 400 for 1 second to complete the pairing with the headset. The LED will turn solid blue when the pairing is complete.

Connect the headset directly to a computer 

1. Plug the supplied micro-USB cable into an available USB port on your computer. 

2. Press and hold the Volume up button on the headset while simultaneously plugging the micro-USB cable into the headset. Once the LED on the headset stops flashing green, release the button.

3. The headset can now be selected as an audio playback device on the computer. When the headset is connected with the USB cable, call controls and the Busylight on the headset are not supported. 

DECT adapter overview